The DragonFlite 95 is a Restricted One Design boat that is meant to compete within a strict set of rules to ensure a true test of a skipper.s ability to tune their boat and race it well.

The DragonFlite 95 is a Restricted One Design boat that is meant to compete within a strict set of rules to ensure a true test of a skipper's ability to tune their boat and race it well. Additionally, this 950mm boat is of high quality for a modest price. The DF95 is sold ready to race which includes transmitter and receiver, just add AA batteries. For those already in the hobby, a boat without transmitter and receiver can be purchased. The DF95 comes with a carbon fiber keel, Mylar sails, and a one piece carbon mast, all cutting edge components. It can be on the water in a few hours and assembled by a person with no experience building boats.

The DragonForce 65 is the fastest growing class of RC sailboats in the U.S. The boat has earned this distinction by being a great one-design sailing boat while being the least expensive ready-to-sail boat on the market. At around $300 for a boat with radio and receiver and about 2 hours of assembly and you're on the water.

The DragonForce 65 is the fastest growing class of RC sailboats in the U.S. The boat has earned this distinction by being a great one-design sailing boat while being the least expensive ready-to-sail boat on the market. At around $300 for a boat with radio and receiver and about 2 hours of assembly and you're on the water.

The boat has fleets at nearly 150 clubs around the country. The clubs range from well-established AMYA clubs, full sized boat yacht clubs, school sailing teams to community association clubs. Within these clubs the boat is sailed from beginners to national champion skippers from many other classes.

An added benefit of the boat is the well-supplied and dedicated national distributor that provides excellent access to boats, parts and accessories allowed by the class rules.

One Design Class sanctioned in April 2003. The Seawind is built by One Manufacturer, and sold through many outlets. The Kyosho Seawind, Seawind SE, and Carbon Seawind model yachts are meter- long replicas of a late 1990's early 2000's America's Cup yacht. 39.37 inches (One Meter) long

The T-37 is a 37 inch RC sailboat with 635.5 square inches of sail area. The hull is built of 1/8 inch mahogany plywood assembled with epoxy for a light, strong composite boat. Most T37s are built from the kit by the owners although the T37 is also available ready to sail.

The T-37 is a 37 inch RC sailboat with 635.5 square inches of sail area. The hull is built of 1/8 inch mahogany plywood assembled with epoxy for a light, strong composite boat. Most T37s are built from the kit by the owners although the T37 is also available ready to sail.

There are over 3400 T37's sailing. Building the boat doesn't require any special tools or previous experience. The T37 is fairly unique amongst today's RC classes in being a wooden hull. The precut plywood hull sides, bottom and deck are put together with West System tm epoxy making a very strong but very light hull that requires no internal framing or bulkheads. The total weight of the fully rigged T37 hull with batteries and sails is 2-3/4 lbs. The ballast casting is 2-1/8 lbs for a total sailing weight of 5 lbs.

The T37 makes an excellent starter boat for clubs. The building kit includes all of the radio control gear, sails, West System tm epoxy, and everything necessary for building and sailing except paint, varnish and batteries. The boat is very quick and maneuverable so it is a fun boat to race for either new or experienced skippers. The class rules allow some innovations, but do not allow any changes that involve significant additional expense or changes that would make a standard boat unable to compete successfully.

The T37 is a modern high performance design with a deep, fairly fine fin keel and balanced spade rudder, but the boat has the traditional elegance of a fine wooden yacht. Each boat is finished off distinctively reflecting the owner's individual taste and personality with custom paint jobs.

The National Championships have been held in Seattle for the past 16 years. T37s are sailing all over the world, in places as far away as Thailand, Brazil and Norway. For video clips of the T37s sailing go to www.modelsailboat.com/movie.html . The T37 is also a beautiful boat to take Windling. Windling is defined as the fine art of relaxing by a lake and enjoying watching your boat sail off across the lake and then return. Whether your boat is sailing fast or barely drifting in the lightest breeze, it is all part of "messing about with boats", and it can be a splendid way to pass many happy hours.

T37 Statistics: Length overall 37.65 inches, Length Waterline 36 inches, Beam 7 inches, Draft 11.5 inches, Total Weight fully rigged with batteries 5 pounds, Ballast Casting 2.2 pounds, Total Sail Area 635.5 square inches, Mainsail Sail Area 391.5 square inches, Jib Sail Area 244 square inches, Height of Mast above waterline 47 inches.

Sanctioned in 1997. Low cost, ARS kit from Thunder Tiger modeled after the America's Cup yachts from the 1990's. 30.7" long, 433 sq in sail area, 4.5 lbs displacement.

The Victoria One Design is a simple, affordable, sailboat manufactured by the Thunder Tiger Model Company, and distributed world wide. The kit's low cost (about $150 for the kit, $250 to perhaps $400 ready to race), ease of assembly, and good sailing characteristics make it a great first yacht, while remaining fun to sail and race for old hands as well. It is easy to transport, fully rigged, in the smallest of cars. The emphasis of the Victoria is on SIMPLICITY and FUN, and to these ends check out the Victoria Class Information Center for the latest building, tuning, and sailing tips, along with other interesting and useful information about the boat.

The boat itself is made of ABS plastic, and is quite durable, capable of surviving virtually any mishap or collision. The kit also includes high quality aluminum spars, sails, and all necessary fittings. All you need to do is add a two-channel radio, two servos and you're ready to sail. Construction is generally a weekend project. The ease of assembly also makes the Victoria a great "club" boat, as new skippers can buy a boat and join the racing with a minimum of trouble and expense. Many clubs conduct "Silver Fleet" racing consisting of boats made entirely from all kit parts.